Ads by Google

Do you use ART embroidery file format? Then read the post :) (Expired)

SewSew Administrator Total Posts: 1,481

Hello Sew Sweetly Fans!

We have been receiving lots of requests for a long time to add the .ART embroidery file format, and finally, we have decided to add it for the newer designs!

But before we add it to the website, we need your feedback on whether it is compatible with your embroidery machine.

Please comment below if you use the .ART format.

Diana

Comments

  • DixieDixie General Member Total Posts: 0

    I can use art format

    Karen
  • DianeDiane General Member Total Posts: 0

    No, I do not use ART

    Des
  • DarleneDarlene General Member Total Posts: 1

    Which ART format? ART4, ART6, ART8. They are all different

  • DixieDixie General Member Total Posts: 0

    Art4

  • SewSew Administrator Total Posts: 1,481

    Hi @Darlene, we can provide any version, but we would like to add a version that can be used with any generation of the machines, does the ART4 version compatible with the newer machines?

    Thanks for your help.

  • PatPat General Member Total Posts: 0

    I have a Bernina and I can use ART or PES.

  • kaykay General Member Total Posts: 1

    art format is all that I use for my Bernina machines.

  • MichelleMichelle General Member Total Posts: 1

    Love art format as I have a Bernia machine. Thank you

  • KarenKaren General Member Total Posts: 0

    Love Art for my Bernia machine, Adorable valentines gnome!

  • SheldaShelda General Member Total Posts: 1

    Yes I use art format thanks!!

  • DavidDavid General Member Total Posts: 0

    i can use art format

  • faoucherfaoucher General Member Total Posts: 0

    très joli j'adore.je suis en PES j ai une brother 800 merci d avance

  • PatriciaPatricia General Member Total Posts: 0

    yes u used art so that is nice

  • DebraDebra General Member Total Posts: 1

    Nope! I use PES format.. Thanks

    Sonia
  • PatPat General Member Total Posts: 1

    Pes

    Sonia
  • YvonneYvonne General Member Total Posts: 1

    I use the Bernina software, which is ART format.

  • DarleneDarlene General Member Total Posts: 1

    Yes, art4 is compatible with Bernina Artista 200 and 740. The newest machines use EXP or DST, then you have to convert 

  • SandieSandie General Member Total Posts: 1

    I only use ART please

  • RosieRosie General Member Total Posts: 1

    I use ARt3 the older version.

  • BarbBarb General Member Total Posts: 2

    I just use pes. I have a Brother Innovis.

  • PriscillaPriscilla General Member Total Posts: 1

    I use ART for my Bernina 730

    Ba
  • DennisDennis General Member Total Posts: 1

    I only use PES

    Sonia
  • lindalinda General Member Total Posts: 1

    I use PES

  • MarionMarion General Member Total Posts: 1

    I use JEF

    Carla
  • TheresaTheresa General Member Total Posts: 0

    I can use ART, but usually end up using PES.

  • LauraLaura General Member Total Posts: 0

    I cannot use ART format. I use PES, DST, HUS and VIP

    Carla
  • LenkaLenka General Member Total Posts: 0

    I use PES, but can transform ART and use it.

  • BonnieBonnie General Member Total Posts: 0

    Do not use ART, I use PES. Thank you

  • SheilaSheila General Member Total Posts: 0

    I use JEF format. But I can convert pes to JEF

  • DianeDiane General Member Total Posts: 0

    Yes I can use Bernina .art format, I prefer Brother .pes

  • BaBa General Member Total Posts: 0

    I use pes -brother and Vip3 , hus for Viking which not working at this time.

    Not able to open Art ,xxx, dst ,Jef. Programs

    Thank you

  • StevenSteven General Member Total Posts: 0

    ik heb pfaff softwaer,bernina en brother,met de pfaff prememium+2 kan het niet opendoen moet selekteren open doen met bernina,bernina gaat open,bestand exporteren in pes of ander heb brother machine.met de vorige versi van pfaff ging het wel,wet niet hoe het komt

  • JoyceJoyce General Member Total Posts: 0

    No so sad - I can only use JEF - but I love this Gnome <3

  • CarolynCarolyn General Member Total Posts: 0

    No I ues PES . I hae a Babylock

  • AnnAnn General Member Total Posts: 0

    I cannot use art, only use JEF or PES

  • ShirleyShirley General Member Total Posts: 0

    I can't use art can't even open it.

  • MarleneMarlene General Member Total Posts: 1

    I do not use the ART format.

  • JgJg General Member Total Posts: 0

    Nope. Tried but won't download or convert.

  • EileenEileen General Member Total Posts: 0

    Don't use the art format.

  • RosemaryRosemary General Member Total Posts: 0

    I Use .Art

  • GailGail General Member Total Posts: 1

    I do not use art format, but perhaps my Vip Professional 5 software will open it. thank you! Your Valentine gnome is adorable

  • DonnaDonna General Member Total Posts: 2

    I can not use the .art format only pes. Gnome is super cute.

  • PaulinePauline General Member Total Posts: 0

    I use Bernina Software V6. I find that some site have designs in ART older formats which when down loaded shows up with GREEN LETTERING then I am not able to open the file.

  • LindaLinda General Member Total Posts: 0

    I have a brother 4500D and it uses PES designs

  • KathyKathy General Member Total Posts: 0

    jef

  • CarrieCarrie General Member Total Posts: 0

    I have a Viking. I need HUS files

    also have a Babylock and Brother. I need PES files file these.

    Thank you

  • Jo AnnJo Ann General Member Total Posts: 0

    I use JEF

  • KayeKaye General Member Total Posts: 1

    I think ART format is only used by Bernina machines. I use ART format. I would also like to see the digitizers list the type f software they use to design their items for sale. It would make translating a design more successful.

  • BarbaraBarbara General Member Total Posts: 2

    I can use ART through my software

  • AnneAnne General Member Total Posts: 1

    I use Art Designs.

  • CarolynCarolyn General Member Total Posts: 0

    I use ART thank you

  • KayKay General Member Total Posts: 0

    I use ART format because I have a Bernina.

  • GinnyGinny General Member Total Posts: 0

    I use ART format on my Bernina.

  • RosaRosa General Member Total Posts: 0

    I can only use XXX. file I have a Singer Futura Quartet 6700. Thank you so much

  • KathyKathy General Member Total Posts: 0

    I have a Bernina Deco 340. I use ART format. thanks!

  • RitaRita General Member Total Posts: 1

    no do not use Art format. vp3 favorite for Pfaff

  • NatashaNatasha General Member Total Posts: 1

    I dont us ART I use PES

  • RitaRita General Member Total Posts: 1

    How can we convert art files to another format? I use vp3 or most any will easily convert, but not art. Thanks.

  • SewSew Administrator Total Posts: 1,481

    Don't worry about other file formats, they are still available for all designs. 🙂 This post is for the .art file format users 👍️

  • MelodyMelody General Member Total Posts: 0

    No i can not use art format only pes. How do I get them the way they use to be, all formats

  • SandieSandie General Member Total Posts: 1

    PES for me.... Thank you

  • CathieCathie General Member Total Posts: 1

    I have Bernina machines and they use ART, but I also can use EXP. I can also bring down PES and use that.

  • SandieSandie General Member Total Posts: 1

    No, it doesnt work for me...

    Sew
  • SandieSandie General Member Total Posts: 1

    When there is a format my machine doesn't use, I use free program to convert it to my needs. I never expect a digitizer to do all the formats available. I try to do my part.

    Sew
  • PhyllisPhyllis Total Posts: 0

    Yes, that is my preferred format!

    Sew
Sign In or Register to comment.

Ads by Google